學術報告
序號 | 日 期 | 學 術 報 告 題 目 | 主講人 | 主講人單位 |
1 | 2016.11.10 | 納微結構對鎂合金強韌性的影響及工藝研究 | 劉筱博士 | 湖南科技大學材料科學與工程學院 |
2 | 2016.11.07 | 汽車用高強度鋼板沖壓成形粘模機理研究 | 董文正博士 | 湘潭大學 |
3 | 2016.10.31 | Effects of marine environment exposure on the static and fatigue mechanical properties of carbon fibre-epoxy composite | 蒙冒洲博士 | 英國普利茅斯大學 |
4 | 2016.10.09 | 復合材料成型工藝的學術系列講座 | Prof. Chris Rudd | 英國諾丁漢大學 |
5 | 2016.09.28 | Rotary actuator based active and semi-active control of vehicle seat suspension | 杜海平教授 | 澳大利亞臥龍崗大學 |
6 | 2016.06.22 | 前碰撞時頸托對乘員頸部脊髓的保護作用 | 趙鵬醫師 | 中南大學湘雅醫院 |
7 | 2016.06.22 | 顱腦損傷 | 馬千權博士 | 中南大學湘雅醫院 |
8 | 2016.06.08 | 基于LS-DYNA的汽車碰撞仿真接觸及應用 | 黃宇鵬 | Dynamore GmbH 德國 |
9 | 2016.06.08 | 汽車碰撞試驗假人有限元模型及其開發應用 | 黃宇鵬 | Dynamore GmbH 德國 |
10 | 2016.06.03 | A Combined Smoothed and Extended Finite Element Method for Fracture Analysis | 陳磊博士 | 美國密西西比州立大學機械工程系 |
11 | 2016.06.02 | Nonlinear Phase-field Model and Its Applications to Li-ion Batteries and Additive Manufacturing Alloys | 陳磊博士 | 美國密西西比州立大學機械工程系 |
12 | 2016.05.30 | 汽車主動安全控制的若干關鍵技術研究 | 陳無畏教授 | 合肥工業大學汽車與交通工程學院 |
13 | 2016.05.09 | 科學研究與技術創新 | 劉維民教授 | 中科院蘭州化學所 |
14 | 2016.05.06 | Creative Design and Innovation:Research & Education | Professor Yan Jin | 河北工業大學 |
15 | 2016.05.06 | Science of Design: Object of Study, Research Methodology, Mathematical Representation and Fundamental Principles | Professor Yong Zeng | Mechanical and Industrial Engineering, University of Manitoba |
16 | 2016.05.06 | Designing as a Meaningful Dialogue Between Disciplines | Professor Yoram Reich | Tel Aviv University |
17 | 2016.05.06 | Integrated Design of Complex Multiphysics Systems Using Model Based Design and Optimization | Professor Zuomin Dong | Mechanical and Industrial Engineering, University of Manitoba |
18 | 2016.05.06 | Introduction of Conference and Discussion Topics | Professor Gary Wang | Mechanical Engineering, University of Victoria |
19 | 2016.05.06 | Overcome “Curse of Dimensionality”: Metamodel-based Design Optimization for Large-scale Problems | Professor Gary Wang | Mechanical Engineering, University of Victoria |
20 | 2016.05.05 | Wind Turbine Aeromechanics and Icing Physics for Wind Turbine Icing Mitigation | Hui Hu教授 | 愛荷華州立大學 |
21 | 2016.05.05 | 結構拓撲優化和可制造性 | 程耿東教授 | 大連理工大學 |
22 | 2016.05.05 | 設計領域若干前沿問題的探索和思考 | 譚建榮教授 | 浙江大學 |
23 | 2016.05.05 | Using Virtual Reality to Improve Users’ Interactive Ability in Product Design and Evaluation | Professor Qingjin Peng | Mechanical and Industrial Engineering, University of Manitoba |
24 | 2016.04.23 | 不確定性結構分析與設計中的建模與優化方法近期進展 | 亢戰教授 | 大連理工大學 |
25 | 2016.04.06 | 全生命周期思考lifecycle thinking及生命周期評價LCA實戰案例 | 張海孝總經理 | 德國THINKSTEP集團大中國區 |
26 | 2016.01.07 | Time-reversal based array damage imaging in structural health monitoring | 袁福國教授 | 湖南省百人、美國北卡州立大學 |